四川11选5

玻璃打胶机打胶不饱满是什么原因?

发布时间:2019/08/30    发布人:

玻璃打胶机打胶不饱满出现这个问题其实很简单,主要是有以下几种情况导致的!下面双组份打胶机的小编就给大家分析一下吧!
The problem of insufficient gluing of glass gluing machine is very simple. It is mainly caused by the following circumstances. The following two-component glue machine knitting to give you an analysis of the bar!
一、打胶速度过快
1. Gluing speed is too fast
有的客户为了加快自己的生产节奏追赶生产计划,将打胶速度认为调整的过快,导致胶体还没有完全达到合格标准机头就已经移动到下一个位置进行打胶操作了。
Some customers in order to speed up their production rhythm to catch up with the production plan, the gluing speed is considered to be too fast to adjust, resulting in the colloid has not fully met the qualified standard head has moved to the next position for gluing operation.
如果我们需要加快打胶的速度调整了打胶机的移动参数的话,那么我们对应的也应该对供胶系统也进行相应的设置,比如这时候我们就需要加大供胶压力,增大打胶机的出胶速度来配合对象的移动速度的增加。
If we need to speed up the gluing speed and adjust the moving parameters of the gluing machine, then we should also set up the gluing system accordingly. For example, at this time, we need to increase the pressure of the gluing machine, increase the speed of the gluing machine to match the increase of the moving speed of the object.
如果我们仅仅是单独的增加了打胶机的移动速度而没有对压力进行调节的话就很有可能出现打胶不饱满的情况发生。
If we simply increase the speed of the glue machine without adjusting the pressure, it is likely that the glue will not be full.
二、供胶压力不足
2. Insufficient supply pressure
这个情况其实在前一种情况的已经进行过描述了,即便你没有对打胶机的移动速度进行调节也出现了打胶不饱满的情况,那么也有可能是供胶压力过小导致的。这时候我们仅仅需要调整供胶压力即可完美的解决这个问题的发生。

双组份打胶机
In fact, this situation has been described in the former case. Even if you do not adjust the speed of the glue machine, there is a situation that the glue is not full, then it may also be caused by too little glue supply pressure. At this time, we only need to adjust the supply pressure to solve this problem perfectly.
三、机头感应器损坏
3. Damage of nose inductor
这种情况非常的少见,但是也不排除这种情况的发生。在我们的打胶机机头有一个对铝条深浅进行探测的感应器,如果发现铝条过深或者过浅的时候他会自动的调整移动的移动速度以及供胶压力(自动调整幅度是小范围内的)。如果我们的铝条本身就深浅不一,在加上我们的感应器损坏的坏就会发生这种情况!
This situation is very rare, but it can not be ruled out. There is a sensor to detect the depth of the aluminium bar in the head of our gluing machine. If it is found that the aluminium bar is too deep or too shallow, it will automatically adjust the moving speed and the gluing pressure (the automatic adjustment range is small). If our aluminium bars are different in depth, this will happen if our sensors are damaged.
感谢您的阅读与观看,本文的精彩内容来自:双组份打胶机,我们会有更多的精彩内容继续为您呈现,详情请点击:http://www.emikasarl.com
Thank you for your reading and watching. The wonderful content of this article comes from: two-component glue beater. We will have more wonderful content to continue to show you. For more details, please click: http://www.emikasarl.com.

四川11选5官网 四川11选5 四川11选5 四川11选5走势图 四川11选5开奖结果 四川11选5开奖结果 彩89 四川11选5 四川11选5 四川11选5