黄大仙精选资料二四六 1., since the curing of two component sealants takes a certain time, the two component glue machine has been coated with two components of sealant glass and should be moved gently.
黄大仙精选资料二四六 Group 2.A and B components should be kept clean, and foreign matters should be strictly prevented from entering the glue.
黄大仙精选资料二四六 3. in the continuous working process, the glue gun will not stop working more than 20 minutes each time. Otherwise, all the mixed glue is washed out with A component glue until the single A component is discharged from the muzzle.
4., high pressure hose should not be forced to bend or bend to prevent the system from functioning normally.
黄大仙精选资料二四六 5., rubber mixer should be kept regular and smooth, so as to ensure good glue production. In case of clogging, acetone can be soaked and cleaned. It is suggested that every 5 groups be cleaned once.
6., when the glue gun is not used for a long time (more than a week), the gun body should be removed and the residual colloid in the glue gun and glue mixing machine should be cleaned with solvents.
7. the number of impurities in the rubber produced by the different double component rubber manufacturers is different. According to the actual situation, the filter net and the one-way check valve of the B component are clear. It is suggested that every two groups be cleaned once.
This article is provided by the double component glue machine for you. Our website is: http://emikasarl.com we will provide you with more quality service and welcome your visit with wholehearted enthusiasm.