If there are many links in the production of hollow glass, in which link can the equipment be added to the maximum benefit and the minimum input?
The whole process of insulating glass may require cleaning, drying, installation of aluminum strip and sealing the two components through the glass surface.
In the whole production process, the two-component seal is the most critical and the most time consuming. Therefore, Xiaobian believes that if our funds are limited, we can focus on the step of sealing the hollow glass and increase the investment of the equipment to buy a two component glue machine.
Two-component sealing glue is used: silicone rubber, silicone rubber, glass, glue pouring machine routine is the glue into the two cylinder, and then to the product through quantitative pump mixing, quantitative glue, and because the two components of the glue viscosity is very high to put the glue into the cylinder is very difficult.
So the two-component glue machine is different from the conventional glue machine is a two-component glue machine is used in plastic barrel according to the specifications of customers, tailored to the pressure plate, glue plate by adhesive, pressure plate is equipped with a piston pump or gear pump rubber, customers only need to glue the bucket positioning the pressure plate can block machine.
Two-component glue machine principle with double liquid dispensing machine, according to customer tailored two AB glue barrel pressure plate, the glue bucket into the pressure plate, the pressure plate pressure glue through quantitative pump mixing, quantitative hit products.
At present, the market of the two-component glue machine for the majority of piston glue, the piston has a pumping process, often causes the lines flickering glue small, so the forest NC two-component glue machine is a precision gear pump can be continuous pumping glue glue this may ensure the glue line uniform, there would be no flickering.
Horizontal double component sealing machine, the glue machine is the first CNC forest and apply for a number of international patents, fully grasp the core technology and equipment to meet any small problems can be solved most of the equipment is small investment, little space occupied workshop.
The above is a two component glue machine today's sharing. Are you satisfied? Welcome to our website: http://emikasarl.com and pay attention to our products. We will provide you with excellent products and sincerely cooperate with you.