黄大仙精选资料二四六

检测双组份打胶机密封圈单向阀的方法

发布时间:2017/11/21    发布人:

  1、检测双组份打胶机的供胶管路是否通畅,混交棒是否完好。因为我们使用胶体的特质决定的供胶管路非常容易杜塞,如果对方平时没有注意对设备保养那么有很大的可能会堵塞、混交棒损坏,如果这部分损坏的话设备的出胶量会变得不正常甚至会出现花胶的情况出现。

黄大仙精选资料二四六  1. Test whether the glue supply pipeline of double component glue machine is unobstructed and whether the mixed rod is intact. Because we use the glue line colloid characteristics determine very easily Dusseldorf, if you usually do not pay attention to equipment maintenance so great may be blocked and mixed rod damage, if this part of any equipment to produce the adhesive will become normal or even a flower gum situation.

  2、DAJIAOJIDEGONGJIAOYALIRUGUOBUGOUDEHUAYESHIHUICHUXIANZHEIGEWENTIDE,YINWEIDAJIAOJIDEJIAOTIWANQUANKAOQIYALAIJICHUSHEBEIBINGWANMEIDETUZHUANGZAIZHONGKONGBOLIDELVTIAOZHONGDE。RUGUOYALIGUOXIAODEHUAYEHUIDAOZHIZHONGKONGBOLIDAJIAOJIMIFENGBUYAN。SUOYIWOMENYIDINGYAOJIANCEXIAWOMENYAOGOUMAIDESHUANGZUFENDAJIAOJIDEYALIXITONGSHIFOUZHENGCHANG,SHIFOUNENGGOUZHENGCHANGDEDIAOJIEYALI。

黄大仙精选资料二四六  2, if the pressure of the glue machine is not enough, it will also appear this problem, because the glue of the glue machine is completely squeezed by the air pressure equipment, and perfectly painted in the aluminum strip of the insulating glass. If the pressure is too small, it will lead to the sealing of glass sealing machine is not strict. So we must check whether we need to buy the pressure system of two sets of glue machine is normal, whether it can regulate the pressure normally.

黄大仙精选资料二四六  3、PAICHAJIANCESHUANGZUFENDAJIAOJIDEMIFENGQUANYIJIHUNHEQIDANXIANGFA,ZHEIBUFENRUGUOSUNHUAIDEHUAHUIDAOZHISHUANGZUFENDAJIAOJIDEaBZUFENBILIBUDUI,CHUXIANHUNLUAN!TONGSHIMIFENGQUANYESUANSHIBIJIAORONGYISUNHUAIDESUOYIWOMENYINGDANGZHONGDIANPAICHA。

双组份打胶机多少钱

  3 、 check and test the sealing ring and mixer check valve of the double component rubber breaker, if this part is damaged, it will lead to the aB component proportion of the two component punch machine is not right, and there will be confusion! At the same time, the sealing ring is relatively easy to damage, so we should focus on investigation.

  SHUANGZUFENDAJIAOJIDANXIANGFA

  One way valve for two component rubber press

黄大仙精选资料二四六  4、ERSHOUSHUANGZUFENDAJIAOJIYINQIJUYOUCHAOGAODEXINGJIABISUOYIHAISHIYOUXIANGDANGDADEYIBUFENQIYEHUIXUANZEERSHOUSHUANGZUFENDAJIAOJI。ERSHOUSHUANGZUFENDAJIAOJIZAIJIAGESHANGJUYOUJIDADEYOUSHI,NENGGOUWEIQIYEJIEYUEYIBUFENZIJINDANSHITONGSHIYEHUIYOUGEZHONGDEFENGXIAN,ZHEIGEJIUXUYAOGEGEQIYEZAIGOUMAIERSHOUSHUANGZUFENDAJIAOJIDESHIHOUCALIANGYANJINGLE。

  4, the second-hand two component punch machine because of its high cost performance, so there are still a large number of enterprises will choose the second-hand two component rubber machine. Second hand two component glue machine has great advantages in price, can save part of the money for the enterprise, but there will also be a variety of risks, this requires each enterprise in the purchase of second-hand two-component glue machine to polish eyes.

  5、WOMENXUYAOJIANCHISIFUDIANJIJIANSUJIJIANHUOJIANSUJICHILUNJIANJIAN、SIFUKONGZHIQIHUODIANJISHIFOUSUNHUAI、SHAOHUI。RUGUOZHEIXIEWEIZHISUNHUAIDEHUAHUIDAOZHIWOMENDESHUANGZUFENDAJIAOJIBOLIDAJIAOJIJITOUBUXINGZOUDIANJIBUZHUANDEGUZHANG

  5, we need to insist on servo motor reducer or reducer gear key, servo controller or motor is damaged, burned. If these positions are damaged, it will lead to the failure of the two component glue machine glass gluing machine head not to walk and the motor does not turn

  本文由双组份打胶机为您提供,我们的网站是:http://emikasarl.com黄大仙精选资料二四六我们将以全心全意的热情为您提供更优质的服务,欢迎您的访问!

  In this paper, a two component glue machine to provide you, our website is: http://emikasarl.com, we will wholeheartedly provide you with better service, you are welcome to visit!