The small maintenance problem is not easy enough to lead to equipment damage and aging. For example, if the hose is normally cleaned, it has been used for three years without pressure. But we usually do not keep good cleaning habits. It is estimated that about half a year will need to be replaced.
We need to regularly clean up the supply parts of the two component rubber gluing machine, such as rubber hose, glue mixer, rubber head and so on. Because of the particularity of the colloid used to process the production of hollow glass, some of the colloids are easily retained in these parts.
The operator should clean up the appearance of the glue machine everyday. In general, we should pay attention to cleaning the residual silica gel and debris dust thoroughly, and keep the cleaning in the studio so as to prevent the glue machine from being disturbed by the external environment.
In order to prevent aging and damage of the shaft and seal ring of the glue machine, operators should regularly use silicone oil to clean it. After washing, it is best to keep it dry and keep it in a closed place.
黄大仙精选资料二四六 On the premise of ensuring the clean and neat appearance of the glue machine, we should pay attention to preventing the contamination of the contaminated material from the operation of the glue machine to the part of the glue machine, especially the important parts of the glue machine, such as the gun head part and so on.
This article is dedicated to the double component glue machine. More related knowledge, please click: http://emikasarl.com we will use the most advanced technology. The most sincere attitude. Provide you with the most comprehensive service. More related