The overall maintenance method of the insulating glass equipment is not difficult. The key is to do well the maintenance lubrication of the equipment pulley, ensure the voltage stability at work time, prevent the motor from burning down, and ensure that the device can run normally.
In case of a major failure during the operation of the equipment, the professional maintenance personnel need to be hired to deal with it. Non professionals do not disassemble or repair.
The two component glue machine should make sure that the hollow glass equipment is ideal, the cleaning of glass is clean and the service life is extended to the greatest extent. We must pay attention to its basic maintenance knowledge. Pay attention to the correct maintenance of the equipment during the use of the equipment. How to maintain, the expert said so. In addition, one point to be noted is that when the failure needs to be overhauled, the total power supply must be cut off first. Besides, the following items should be noted as follows:
The water tank in the equipment should ensure the normal water circulation of the system. Once a week, the tank must be thoroughly cleaned. The nozzle should be checked routinely. Once there is a blockage, it is necessary to dredge and clean up immediately. In addition to the maintenance of the wind road, the operation of the equipment fan should be kept good and stable.
Maintenance of the transmission roll. The key parts of insulating glass equipment must be careful to lubricate regularly. Before the operation of the equipment, check the lubricants first, see whether the oil level mark is normal, and the oil level must be kept above the centerline of the slide mark.
This article is provided by two component glue machine. Our website is: http://emikasarl.com, we will provide you with better service with wholehearted enthusiasm, welcome your visit.